JXLD bracket

　　JXLD bracket.If one of the following conditions is met, a single pivot rack is better:

　　a. The mixing container is equipped with a bottom bearing as a force fulcrum.

　　b. The shaft seal body is equipped with a bearing (including a rigid bush) as a force fulcrum (the degree of force is specified in accordance with the requirements of the shaft seal)

　　c. In the mixing container, there is a guide bearing in the middle of the shaft, which serves as a force fulcrum (ie, intermediate bearing)

　　When the stirring shaft with the above conditions is used, when the JXLD bracket is selected, the distance between the stirring shaft and the reducerCouplingMust chooseFlexible coupling.

　　In practical applications, rigid couplings are often used instead of elastic couplings to connect the mixing shaft and the output shaft of the reducer, and connect the bottom bearings or intermediate bearings and other fulcrums.This use simplifies the application conditions of the single fulcrum rack, but it is only suitable for occasions where the stirring is not strong, the power is small, and the load on the bearing is small.When the bearing structure of the fulcrum is changed from time to time, adopt tapered-hole spherical roller bearings with adapter sleeves, or remove the suspension ring in the jacket coupling, so that the axial position of the stirring shaft has room for proper adjustment.