Any injury about the teeth surfaces of the sprocket diminishes the life on the conveyor chain.
With traditional sprockets, substantially worn sprocket teeth have been repaired by teeth padding or even the total sprocket was replaced. In either case, fix was costly and with teeth padding, accuracy was impaired. We created new sprockets with 
detachable teeth for independent substitute. This sprocket is highly rated by our shoppers for the dramatic financial savings in cost and time.
Construction
The teeth is often replaced by two procedures: individual tooth substitute or sectional teeth replacement.
The bolts and nuts applied for mounting the teeth on to the sprocket are spot-welded to prevent loosening.
The respective structures are illustrated on the correct.
The over photograph and the top correct illustration present a sprocket for person tooth replacement. Since the joint encounter concerning the replaced teeth as well as the sprocket is formed within a distinctive arc, the bonding accuracy is substantial plus the sprocket power is enhanced. Additionally, because the load acting about the mounting bolts is decreased, there exists significantly less possibility of loosening. This sprocket development is patented.
You will discover two styles of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are applied for significant sprockets obtaining heavy loads and welded sheet steel hubs for other applications.
DK Detachable Teeth Sprockets
Tags: