Link

Helical-worm gearmotors
Due to their style and from being combined with a helical equipment stage, the helical-worm gearmotors S..DR.. have particularly high efficiency. Also, they are extremely low-noise and therefore avoid high noise emission levels.
Low-noise continuous operation: equipment unit combination optimized with respect to efficiency
Do you anticipate a drive alternative to impress you with its high level of overall performance and efficiency? If so, we would recommend our high-quality helical-worm gearmotors EP for you. These could be implemented individually in the modular system. In this manner, they offer you a massive range of sizes, equipment ratios and electric motor sizes.
However, their greatest strength is usually their running smoothness and their extremely low noise development. A very important factor is for certain – With the helical-worm gearmotors EP you opting for a robust drive solution that you will hardly even hear.
The overall concept also offers you a lot more practical product characteristics and benefits. These include the significantly higher effectiveness of the helical-worm combinations as opposed to single helical-worm gear products. This is one way you save extra energy in the procedure of your systems and are able to noticeably reduce ongoing operating costs.
You will receive the low-noise helical-worm gearmotors EP. – to fit your person requirements – with a wide range of AC motors. Furthermore, you can freely configure all the relevant properties. In this way, you can effectively utilize all the benefits provided by this mixture of low-noise helical-worm gear unit and performance-optimized engine. Even greater variance may be accomplished thanks to the optional flange or foot-mounted design and by selecting between solid and hollow shaft.
Save time and money
By opting for among our gearmotors, you are already saving money and time with this selection and project planning. It is because our modular system allows a multitude of mixture options for gear units and motors. You can for that reason reduce operating costs, count on an extended service life and benefit from simplified maintenance that is characteristic of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than one helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
AC motors
Combine the helical-worm gear unit with our AC motors:
Characteristics
Quiet and reliable transmission of torque
High overload capacity
Hardened steel worm equipment and bronze alloy worm steering wheel provide exceptional durability and long service life.
Optional durable bearings deliver high radial and axial load capacity
High strength cast iron housing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminium alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Obtainable in footed, shaft attach or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear systems are helical/helical-worm combinations, so they are better than normal helical-worm equipment units. Because of their outstanding performance, these drives can be utilized in every commercial sector and customized to individual torque and swiftness requirements. The decrease ratios afforded by the helical-worm gear stage and the reduced noise levels during procedure make these gearmotors ideal low-cost solutions for basic applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Due to the unique mixture of optimized worm wheel material with special lubricants, optimized form, this helical worm gear motor powerful electric motor achieves high levels of performance and torque. The casing machined on all sides enables diverse mounting options. Double chamber shaft seals are utilized as standard.
The reduced contour design helps it be ideal for implementing applications e.g. in the food industry. The housing has no recesses, which simplifies cleaning – an especially essential feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm, foot
Course 12 Helical and hardened and ground worm gears: Provides higher efficiencies and better torque capacity in smaller sized sizes.
Multiple Input Options: Essential gear motors, inch or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft installation, inch and metric output shafts, mounting pilots and flanges provide a wide variety of design solutions.
UNIBLOCK Housing: For optimum rigidity universal installation on five sides or via a torque arm.
Sealed for Washdown: Retains contaminants and water out.
Worldwide Engine: Multiple leads and windings for worldwide multi volt/Hz requirements in addition modular design to accept brakes, encoders or pressured cooling.
EP gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right position worm geared motors established new specifications for reliability, efficiency and economy with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly design offers easy integration at this point and a really future proof remedy. The EP gear motor offers total versatility in mounting options includes shaft, base, face, and flange solutions. The motor terminal box can be mounted in alternate positions rotated in 90º steps around the motor frame offering for unparalleled integration options.
EP gear motors comply with North American and International requirements, including NEMA, IEC, CSA, and CE, the EP series allows for worldwide acceptance, a true total answer for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the EP series is usually dirt tight and hose evidence,and can be used outside or in wet and dusty conditions without the use of additional enclosures. Complete rated output is available at the result shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connection Standard with CAGE CLAMP®
Additional features:
Connecting with Plug connectors.
With included inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
Because of the unique mixture of optimized worm wheel material with special lubricants and optimized form, this powerful geared electric motor achieves high degrees of efficiency and torque. The low contour design helps it be ideal for implementing applications e.g. in the meals industry. The housing has no recesses, which simplifies cleaning – an especially important feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a broad selection of compact, heavy duty helical gear drives with extended life performance features and simplified maintenance. The utilization of condition of the art helical and worm gear combinations affords optimum overall performance fulfilling a multitude of ratio requirements. The 800 BR is functionally interchangeable with most major manufacturer’s drives.
SPECIFICATIONS
Double and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All devices shipped pre-lubed for your unique mounting position with KluberSYNTH UH1 6-460
Obtainable in NEMA C-face flanged and direct input
Projecting and hollow output shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white-colored (BK) and stainless epoxy finish (SBK)
Available in hollow or projecting output shafts
Dual and triple reduction ratios
Flanged or foot mounted
All models adaptable to ground, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared electric motor. A favorably priced option for the standard jobs expected of a right-angle drive.
5 gear sizes (S0 to S4).
Engine power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from we = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors offered with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear device and AC motor are directly flange mounted, the pinion is on the motor shaft. This integrated compact design can be an essential factor for the high precision and the remarkable stiffness of EP geared motors.
For vector-controlled inverter procedure usage of an incremental encoder is provided for as standard.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The amount of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are produced from case hardened alloy steel and the flanks are precision floor. The worm tires are made from special wear-resistant bronze. Helical worm gears include a helical equipment. Worm gears with shrink disc, torque limiter, and also adjustable backlash designs are also component of our standard item range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Efficiency gearboxes in universal style. The housings are made from high quality cast iron. The rugget walls and internal ribbing ensure incredibly torsional stiff and sound dampening housings. The exterior ripping offers a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent operation under rough circumstances
Above average lifespan
Housing produced from high quality grey cast iron with durable walls and internal ribbing
Extreme torsional resistance and low noise
Case hardened worm shafts and worms with precision floor flanks
Worm wheels produced from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes built with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange installation or universal design
Output shaft available since solid shaft or hollow shaft
Shrink disc, torque limiter,along with adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG