Open up and innovate, customer first
The diaphragm shaft structure produced by the machinery factory makes the left and right center of gravity close to the support bearings of the units on both sides to the maximum extent, and the additional bending moment to the rotor shaft head is small, which is conducive to high-speed and stable operation.Intermediate joint spigot connection, overall assembly and disassembly, the entireCoupling即使多次装拆亦保持的对中和动平衡。两挠性体(膜片)之间距离大,联轴器吸收机组不对中能力强。其挠性元件采用AISI301或镍合金刚,抗拉强度达到150-170kgf,按每分钟1万转计算,其疲劳寿命可达20年,其它部件采用AIS4140或相当的高强度轻质合金,因此,该联轴器具有重量轻,轴向刚度,扭转强度等力学性能优良,可保护机组输出轴,延长机组使用寿命等显著特点。
The diaphragm shaft device relies on the elastic deformation of the diaphragm to compensate for the relative displacement of the connected two shafts. It is a high-performance flexible shaft device with metal elastic elements. It does not require lubrication, has a compact structure, high strength, long service life, and no rotation. The gap is not affected by temperature and oil pollution, and has the characteristics of acid resistance, alkali resistance and corrosion resistance.Diaphragm couplings are suitable for shafting transmissions in high temperature, high speed, and corrosive environments, and are widely used for shafting transmissions of various mechanical devices, such as those produced by our factoryJM16 couplingThe torque of the model diaphragm shaft is 13000N.m. The momentary torque is 20000N.m. The high speed is about 2450 rpm, and the moment of inertia is only 0.85kg.m2. The weight of this set of model shafts is 75 kg, so the company’s retail price is 2700 yuan per unit. set.The specific size of the shaft is: the large outer diameter is 350mm and the shaft hole is between 75-130mm. The machine factory can also produce special-shaped sizes, and the quality and reputation are guaranteed. The coupling is good!Welcome your visit!The figure is as follows: