Open up and innovate, customer first
Couplinginstallation
The following points should be paid attention to when installing the coupling, which is the experience gained by the machinery factory after several years of practice: (1)It first connects the journal andCouplingUse gasoline or kerosene to wash and wipe clean the matching parts.If there is roughness and damage, it should be eliminated with whetstone and fine emery cloth, or treated by other methods. Use a micrometer and a micrometer to carefully measure the inner diameter of the journal and the coupling, and the keyway of the coupling. , The length of the shaft hole of the coupling and other relevant dimensions are calibrated one by one. (2) The installed coupling can be divided into 3 types, large, medium and small. From the small, the corresponding equipment should also be small because the shaft hole of the small coupling is small. There is a knocking process to install the coupling. At this time, pay attention to it. , Either tap the installation, or add some shock-absorbing tools when tapping, so that the equipment will not be damaged.The key to the installation of a medium-sized coupling is reasonable symmetrical tapping or installation by a press. Fortunately, adding some lubricating oil to the shaft hole of the coupling is better.Large couplings require a press or the heating installation popular among operators is quicker (3) The installation of accessories must be tightened, and the oil should be refueled. (4) It is to be optimistic about the coupling The tags are carefully installed.
As a coupling manufacturer-Machinery Factory introduced the above simple but important coupling installation process.If you have any questions, please contact the machinery company and treat each other sincerely and honestly!