Coupling brakeThe installation status directly affects the service life of the entire equipment. There are single brake wheels, tooth brake wheels, plum brake wheels, pin brake wheels, and heavy machinery plus brakes are also good protection methods. A simple schematic diagram of a hydraulic brake system to illustrate the working principle of the brake system.A metal brake drum with the inner circular surface as the working surface is fixed on the wheel hub and rotates with the wheel.On the fixed brake base plate, there are two supporting pins supporting the lower ends of the two curved brake shoes.A friction plate is installed on the outer circular surface of the brake shoe.The brake bottom plate is also equipped with hydraulic brake wheel cylinders, which are connected with the hydraulic brake master cylinder installed on the frame by oil pipes.The piston in the master cylinder can be manipulated by the driver through the brake pedal mechanism. XINLAN machinery asCoupling manufacturersGuide one or two.The brake must be pressed on the working end, not the motor end. Braking the working equipment will greatly reduce the inertial impact and friction of the transmission parts!Especially with brake wheelsCouplingIf you want to distinguish the brake end of the shaft hole, if you don't understand, please consult XINLAN Machinery!Technology——(Liu)