The timely replacement of the connecting parts is conducive to the service life of the coupling. There are several common sense in machinery

The connector isCouplingDuring work and damaged parts, its maintenance can be replaced in time, which is conducive toCouplingThere are a few common senses about the service life of the machine. It is composed of a combination of polyurethane pads and worn on the screws. In the working state, it is impact and abrasion is the vulnerable part. To what extent should the damage be dealt with. It is described in three points (1) Start , When the equipment is suspended, there is a sound generated by inertial impact, which can prove that it is time to repair. (2) When you stop working, watch the difference between the diameter of the pin and the half-connected connecting hole. Ensure that the diameter of the single side is within 0.5mm and the diameter is 50mm. It is normal. When the hole range is 50-70mm, the single side cannot be 1.3mm. , For the user's reference of the coupling, please contact the company's technology if you need it. (3) If the shock absorber is broken or damaged, replace it.For other products, the machinery factory does not give a detailed briefing. The company is based on performance. Chinese people, good integrity!                                                                                 

Manufacturer Phone